Kenmore Elite Sensor smart 27-inch wide electric dryers Owner's Manual And Installation Instructions page 7

C.
MAKE ELECTRICAL CONNECTION (pgs. 13-23)
If using a power cord:
Tools Needed:
_-inch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Flashlight (optional depending
on installation)
Parts Needed:
New 3- or 4-wire, 30-amp.,
U.L.-listed power supply
cord kit (includes strain relief)
If making a direct wire connection:
Tools Needed:
Parts Needed:
_-inch nut #2 Phillips head
driver (shown) screwdriver
or socket wrench
Wire stripper Flashlight (optional
depending on
installation)
10-gauge, 3- or 4-wire,
flexible armored
or nonmetallic
sheathed copper cable
(with grounding wire).
_-inch,
U.L.-listed
strain relief