Kenmore Elite Sensor smart 27-inch wide electric dryers Owner's Manual And Installation Instructions page 48

Problem Possible Cause 8olution
Dryer WHI Power cord not firmly ptugged PJug power cord into a live circuit.
Not Run into a live circuit with proper
vottage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Using a regular fuse. Replace with a time-delay fuse.
Dryer door not firmly closed. Close dryer door tightly.
START pad not pressed. Press START pad.
Cycle not selected. Select cycle and press START pad.
Lint in Load Lint screen is clogged. Clean lint screen. Check for air
movement.
Improper sorting. Sort lint givers from lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carried to the lint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see "OPERATION").
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load Improper use of fabric softener Use fabric softener sheets in dryer. Add
in washer, at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
totems Overdrying. Match dryer settings to fabric type
Shrinking (see "OPERATION").
Poor garment quaJity. Check quality of garment before
purchasing.
Manufacturer's care label Fottow fabric care label instructions
instructions not followed, carefully.
Loads are Overloading. Dry smaller loads that can tumble freeJ
WrinMed Overdrying. Match dryer settings to fabric type
(see "OPERATION").
Load teft in dryer at the Remove Joad as soon as tumbling
end of cycle, stops.
Odors HousehoJd chemicals, paint, Do not use dryer whiJe these chemicaJ
or varnish being drawn fumes are in the air.
into dryer.
First use of dryer element. Odor wilt be gone after the first cycle.
Unusua_ Thumping of rotters when Thump will go away after 5 minutes
Sound dryer has set. of drying.
48