Connections - Panasonic WV-CS580/G Installation Manual

Connections

Precautions
• The following connections should be made by qualified service personnel or system installers in accordance
with all local codes.
• See the reverse side of the cover page for main lead connection.
• Turn off the power at the fuse box before starting the installation work, or it so could result in fire, electric shock,
personal injury, and material damage.
RS485 Data Port
Red
Data
Orange
Tx
Yellow
Data
Green
Rx
20
Brown
Blue
220 V - 240 V AC
(WV-CS580)
Green/Yellow
24 V AC (WV-CS584)
Data Port (RS485)
(RJ-12)
Video Output
Connector
(BNC)
Alarm Input
Connector
Alarm Output
Connector
*1: For twisted pair cable, use shielded low-impedance cable with a thickness
of at least AWG#22 (0.33 mm
*2: Keep the overall length of coaxial cable under 1200 m (in the case of
RG-6/U (5C-2V)).
*3: Be sure to connect the grounding cable to ground.
*4: Since a female cable is not attached, cut off the connector and connect to
the twisted pair cable of the same type.
Alarm Input Connector
T(B)
T(A)
R(B)
R(A)
(RJ-12)
*5: The type of twisted pair cable is AWG#28.
*6: The type of twisted pair cable is AWG#26.
(Live)
To the power supply
(Neutral)
GND ( Safety grounding )*3 WV-CS580
GND ( Signal grounding )*3 WV-CS584
Twisted Pair Cable*1
Coaxial Cable RG-6/U (5C-2V)*2
To sensor, etc.*4
To buzzer,
display device, etc.*4
2 ).
Alarm Output Connector
Alarm In 1*5 (Black)
GND*5 (Brown)
Alarm In 2*5 (Red)
GND*5 (Orange)
Alarm In 3*6 (Yellow)
GND*6 (Green)
Alarm In 4*6 (Blue)
GND*6 (Violet)
To Matrix Switcher,
etc.
To VIDEO IN port
(CAMERA IN)
Alarm Out 1*5 (Grey)
GND*5 (White)
Alarm Out 2*5 (Pink)
GND*5 (Light Green)