Jensen JIMS-125I User Manual page 9

5. Press the  or  button to adjust the minute. Press and hold the button for fast
advance / reverse setting.
6. Press the ALARM 1 or ALARM 2 button to confirm the minute setting, the alarm
sound icons will flash.
7. Press the  or  button to select the wake up option (iPod, Beep, Radio).
8. Press the ALARM 1 or ALARM 2 button again to complete the alarm setting. The
alarm indicator
9. To disable the alarm, press and hold the ALARM 1 or ALARM 2 button until the
alarm indicator
Note:
The alarm will automatically switch to the beep alarm if you selected wake to

iPod/iPhone but do not have an iPod or iPhone docked,
If you select wake to Radio, ensuring a desired radio station is tuned to a radio

station. The unit will play the last radio band and station you listen to when the
wake time is reached.
The unit features a crescendo wake up for the beep alarm, radio or iPod/iPhone.

When the alarm time is reached, the sound will increase gradually from a very low
level and increase to a louder level. For radio and iPod/iPhone wake-up, the preset
volume level will be the loudest level. It will reach after about 120 seconds.
Wake to Radio
The Radio will automatically turn on when the alarm time is reached. The

respective or
It starts softly and gradually becomes louder until preset volume level is reached.

The radio alarm will sound for 60 minutes and then turn off automatically if no

snooze button pressed.
To stop the radio sound immediately, tap the

Wake to Beep Alarm
The Beep Alarm will automatically turn on when the alarm time is reached. The

respective or
It starts softly and gradually becomes louder and louder until its maximum level is

reached.
The beep alarm will sound for 60 minutes and then turn off automatically if no

snooze button pressed.
To stop the beep alarm sound immediately, tap the

Wake to iPod / iPhone
The docked iPod / iPhone will automatically turn on when the alarm time is

reached. The respective
It starts softly and gradually becomes louder until preset volume level is reached.

or will appear to indicate it is enabled.
or disappears.
indicator will blink.
indicator will blink.
or indicator will blink.
button.
button.
2