Default Setting Items; Printer Defaults; Action Of The Printer - Epson 890N - FX B/W Dot-matrix Printer Service Manual

EPSON FX-890/2190

1.4.1.3 Default setting items

Table 1-40. Setting Values Available for Default Setting Mode
Item
ESC/P, IBM PPDS, OKI ML320T
Software
*IBM PPDS is the same as IBM 238x plus.
Auto tear Off Wait Time 0.5 second, 1 second, 2 seconds, others
4.2 mm, 20 mm, 22 mm, 24 mm, others
Bottom margin
*When "24 mm" is selected, the printer acts with approx.23.5 mm
Line Spacing 6LPI, 8LPI
Paper Out Override OFF (No), ON (Yes)
Note : Settings with bold weight mean the default setting.

1.4.1.4 Printer defaults

FX-880T+ mode has different defaults from current FX-890 mode as follows.
Items
Software
Top margin
Bottom margin
Auto tear Off Wait Time
Note "*" : IBM PPDS is same as IBM 238x plus.
PRODUCT DESCRIPTIONS
Setting / Value
N
Table 1-41.
Current FX-890 FX-880T+ (=ML320T)
ESC/P IBM PPDS (*)
4.2 mm 22.5 mm
4.2 mm 24 mm
3.0 sec. 0.5 sec.

1.4.1.5 Action of the printer

Interface
FX-880T+ mode does not have Device ID.
Only Parallel I/F is possible use. (Can not use USB I/F and Optional Type-B I/F)
Tear Off
When the Tear Off button is pushed, the printer sends the present printing position
in the Tear Off position.
If the Auto Tear Off setting is On, the printer always do the Tear Off action when
it is not printing.
TOF position (MicroAdjust)
The setting range of Micro Adjust is 4.2mm to 22mm to 558.8mm(22inch).
NOTE: * Don't set up TOF more largely than Page length.
Dimensions and Weight
Revision B
42