Epson 890N - FX B/W Dot-matrix Printer Service Manual page 14

EPSON FX-890/2190
Table 1-11. Continuous paper (Single sheet and Multi Part) FX-890
FX-890
Width (inch)
(mm)
Length (one page) (inch)
(mm)
Copies
Total thickness (inch)
(mm)
2
Weight (g/m )
(lb)
(not multi part)
Weight (g/m 2 )
(lb)
(one sheet of multi part)
Quality
Jointing
Note "*" : When pull tractor is used, 1 original + 6 copies are available only under normal
temperature and humidity conditions.
PRODUCT DESCRIPTIONS
Bottom/Front/Rear Entry
Minimum Maximum
(4) (10)
101.6 254
(4) (22)
101.6 558.8
1 original + 5 copies *
(0.0025) (0.018)
0.065 0.46
52 82
(14) (22)
40 58
(12) (15)
Plain paper, Reclaimed paper
Carbonless multi part paper
Not break, without wrinkle, without tear,
without turn over
Point glue or paper staple(both side)
Table 1-12. Continuous paper (Single sheet and Multi Part) FX-1190
FX-2190
Width
Length (one page)
Copies
Total thickness
Weight
(not multi part)
Weight
(one sheet of multi part)
Quality
Jointing
Note "*" : When pull tractor is used, 1 original + 6 copies are available only under normal
temperature and humidity conditions.
Features
Bottom/Front/Rear Entry
Minimum Maximum
(inch) (4) (16)
(mm) 101.6 406.4
(inch) (4) (22)
(mm) 101.6 558.8
1 original + 5 copies *
(inch) (0.0025) (0.018)
(mm) 0.065 0.46
2
(g/m ) 52 82
(lb)
(14) (22)
(g/m 2 ) 40 58
(lb)
(12) (15)
Plain paper, Reclaimed paper
Carbonless multi part paper
Not break, without wrinkle, without tear,
without turn over
Point glue or paper staple(both side)
Revision B
14