Epson 890N - FX B/W Dot-matrix Printer Service Manual page 15

EPSON FX-890/2190
Table 1-13. Labels (FX-890)
Bottom/Front Entry
FX-890
Minimum
Label size See Figure 1-1 below.
Base sheet width (inch)
(mm) 101.6
Base sheet length (inch)
(mm)
101.6
(one page)
Base sheet (inch) (0.0028)
(mm) 0.07
Thickness
Total thickness (inch) (0.0063)
(mm)
0.16
Label weight 2
(g/m )
(lb)
Quality Plain paper or the same quality
labels
Note1: Printing on labels is available only under normal temperature and humidity conditions.
2: The base sheet of labels must be continuous paper.
3: Labels should be inserted from bottom or front entrance.
4: Do not pull out paper from backward.
5: No label paper should be left on the printer when the printer is not used.
6: Do not print on the base sheet of labels.
7: Do not use cut sheet labels.
PRODUCT DESCRIPTIONS
Rear Entry
Maximum Minimum
-----
(4) (10) -----
254
(22) -----
(4)
558.8
(0.0035) -----
0.09
(0.0075) -----
0.19
64 -----
(17)
-----
FX-2190
Maximum
Label size
----- Base sheet width
----- Base sheet length
(one page)
----- Base sheet
Thickness
----- Total thickness
Label weight
Quality
Note1: Printing on labels is available only under normal temperature and humidity conditions.
2: The base sheet of labels must be continuous paper.
3: Labels should be inserted from bottom or front entrance.
4: Don't pull out paper from backward.
5: No label paper should be left on the printer when the printer is not used.
6: Don't print on the base sheet of labels.
7: Don't use cut sheet labels.
Features
Table 1-14. Labels (FX-2190)
Bottom/Front Entry
Minimum Maximum
See Figure 1-1 below.
(inch) (4) (16)
(mm) 101.6 406.4
(inch) (22)
(4)
(mm) 558.8
101.6
(inch) (0.0028) (0.0035)
(mm) 0.07 0.09
(inch) (0.0063) (0.0075)
(mm)
0.16 0.19
2
(g/m ) 64
(lb) (17)
Plain paper or the same quality
labels
Figure 1-1. Label Size
Revision B
Rear Entry
Minimum Maximum
-----
----- -----
----- -----
----- -----
----- -----
-----
-----
15