EPSON FX-890/2190
1.3.5.2 Setting Items
Setting values available for default setting and factory settings are as shown in the table
below:
Table 1-38. Setting Values Available in Default Setting Mode
Item
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch,
Page length for front tractor
11inch, 70/6inch, 12inch, 14inch, 17inch
3inch, 3.5inch, 4inch, 5.5inch, 6inch, 7inch, 8inch, 8.5inch,
Page length for rear tractor
11inch, 70/6inch, 12inch, 14inch, 17inch
Skip over perforation
OFF, ON
Auto tear off
OFF, ON
Auto line feed
OFF, ON
Print direction
Bi-D, Uni-D
Software
ESC/P, IBM PPDS
0, ∅
0 slash
I/F mode
Auto, Parallel, USB, Option
Auto I/F wait time
10 seconds., 30 seconds.
Parallel I/F bidirectional time OFF, ON
Packet mode
Auto, OFF
Standard version:
Italic, PC437, PC850, PC860, PC863, PC865, PC861,
BRASCII, Abicomp, Roman 8, ISO Latin 1, PC 858, ISO
8859-15
NLSP version:
Italic, PC437, PC850, PC437 Greek, PC 853, PC855, PC852,
Character table
PC857, PC866, PC869, MOZOWIA, Code MJK, ISO 8859-7,
ISO Latin 1T, Bulgaria, PC774, Estonia, ISO 8859-2, PC866
LAT., PC866UKR, PCAPTEC, PC708, PC720, PC AR864,
PC860, PC865, PC861, PC 863, BRASCII, Abicomp,
Roman8, ISO Latin 1, PC858, ISO8859-15, PC771, PC437
Slovenia, PC MC, PC 1250, PC 1251
International character set for
Italic U.S.A., Italic France, Italic Germany, Italic U.K., Italic
Italic table
Denmark 1, Italic Sweden, Italic Italy, Italic Spain 1
Manual feed wait time
1 second, 1.5 seconds, 2 seconds, 3 seconds
PRODUCT DESCRIPTIONS
Setting / Value
*2
Operation
Table 1-38. Setting Values Available in Default Setting Mode (continued)
Item
Buzzer
OFF, ON
Auto CR ( IBM PPDS)
*1
OFF, ON
*1
IBM character table
Table 2, Table 1
Note "*1": This setting is effective when IBM PPDS emulation is selected.
"*2" : Settings with bold weight mean the standard factory settings.
Revision B
Setting / Value
*2
34