Before Using For The First Time; Set The Water Softener Unit; Load The Machine Carefully; Add Cleaning Agent - Miele G 7860 Operating Instructions Manual

Before using for the first time please
pay special attention to the following
points.
Detailed information on these points
can be found in the relevant sections of
these Operating Instructions.
The water softener unit must be set for
the water hardness level in your area.
The salt reservoir also has to be filled,
first with water and then with
reactivation salt.
,
Filling the salt reservoir with
cleaning agent by mistake will cause
serious damage to the water
softener. Please check every time
before refilling that the package
contains reactivation salt.
,
Inadvertently filling the reservoir
for rinsing agent with cleaning agent
(including liquid cleaning agents
and washing up liquid) will cause
serious damage to the reservoir.
Do not use cleaning agents formulated
for use in domestic dishwashers.
Arrange the load so that water will
come into contact with all surfaces.
Concealed surfaces will not be
cleaned.
The spray arms must not be blocked by
any items.
Follow the cleaning agent
manufacturer's recommendations on
dosage.
The amount required will depend on the
type of cleaning agent and the
programme chosen.
Make sure you read the notes on
dosing given in the programme chart.
Cleaning results may vary from brand
to brand. If you are not satisfied with
the results from one brand, try another
quality brand before contacting Miele
for advice.
Regular checking and cleaning is
essential.
11