Table of Contents
Advertisement
.~
sr
the Plumber m
Connect to drain
(observe local codes)
1.
The unit is provided with a gravity drain.
2.
The ideal installation
has a standpipe
(1 Vi"
[32
mm] minimum) installed directly below
the outlet of the drain tube. Refer to
figures for the proper location of the
standpipe.
3. It may be desirable to insulate drain line
thoroughly
up to drain inlet.
Connect drain pump
When drain connection
below the level of
the unit is not available, a drain pump may
be used to lift the water to an available
drain.
1.
Install drain pump in rear compartment
are%. Run bin drain directly into pump as
shown. Attach pump in level position.
2. Plug power cord of ice maker into recep-
tacle on drain pump.
3. Plug power cord of drain pump into wall
receptacle.
NOTE:
Your ice maker may or may not
include a DRAIN PUMP. If your ice maker
model does not include a DRAIN PUMP,
one can be ordered from your dealer.
LINE
ADD HOSE FROM BIN DRAIN
DIRECTLY TO PUMP
/
warn ID TUBE
ICE MAKER
POWER CORD
TO DRAIN
PUMP
RECEPTACLE
DRAIN PUMP
POWER
CORD TO
WALL
RECEPTACLE
7
Advertisement
Table of Contents
