Table of Contents
Advertisement
BEFORE YOU BEGIN
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation . This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time withoutnotice.
·
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
Odeon P-trap 180mm Toilet
Includes seat
Includes Bowl
Includes Tank
Odeon S-trap 255mm Toilet
Includes seat
Includes Bowl
Includes Tank
Odeon S-trap 305mm Toilet
Includes seat
Includes Bowl
Includes Tank
Service parts
Fill valve
Mounting Plate Assy
Flush Valve Assy
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 155mm (6-1/8") centers.
·
Passageways is 60mm (2-3/8").
·
Water depth from rim is 245mm (9-5/8")
·
Ensure that the new drain and shut-off valve have the
correct roughing-in dimensions.
·
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
·
Carefully inspect the new fixture for any sign of damage.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112. 19.2M).
1037406-T01-A
K-8711T
K-8741T-*
K-8709T
K-8710T
K-8753T
K-8741T-*
K-11184T
K-8710T
K-8766T
K-8741T-*
K-8767T
K-8710T
K-82984-B
K-1004142
K-1004139
See Fig.#1
.
P-TRAP 180mm K-8711T S-TRAP 255mm K-8753T
·
,
·
·
180mm
255mm
305mm
·
·
·
·
60mm(2-3/8")
·
·
1
·
·
·
ASME(A112. 19.2M)
528137
ã
-1-
ã
ODEON
INSTALLATION INSTRUCTIONS
P/S-
VITREOUS CHINA P/S-TRAP TOILET
S-TRAP 305mm K-8766T
155mm(6-1/8")
245mm(9-5/8")
Copyright Kohler China Ltd., 2004
K-8711T
K-8741T-*
K-8709T
K-8710T
K-8753T
K-8741T-*
K-11184T
K-8710T
K-8766T
K-8741T-*
K-8767T
K-8710T
K-82984-B
K-1004142
K-1004139
, 2004
Advertisement
Table of Contents
Related Manuals for Kohler ODEON K-8711T
Summary of Contents for Kohler ODEON K-8711T
- Page 1 · · All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time withoutnotice. · ·...
-
Page 2: Tools And Materials Required
TOOLS AND MATERIALS REQUIRED (Not supplied) · · 254mm 254mm adjustable wrench · · Metal file (file cut) · · Tape measure · · Tubing cutter · · Level · · Hacksaw · · Putty knife · · Screwdriver · ·... - Page 3 NOTE: Do not use white cement or high lime content cements to install this toilet. The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement. Fig.#2a Fig.#2b...
- Page 4 The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement. 4 Connect fill valve to water supply with hose only.
- Page 5 5.CHECK WATER LEVEL Turn on water supply check for leaks. If necessary, adjust black float adjustment clip, and sliding float up or down on metal float rod until water level at marked water line Float Float Adjustment clip Fig. #5 Make sure the arrow on the green float on the white flush valve is secure and pointing to #2.
- Page 6 7. CONNECT PUSH BUTTON Put large flange through hole in lid. Screw retaining ring onto flange. Turn the screw inside the push button flange to secure tank lid to flush valve assembly. Make certain that the flush valve assembly is adjusted high enough that the button touches the assembly.
- Page 7 8. Install seat with hardware provided. See Fig.#8. 8£ Fig. #8 1037406-T01-A...
-
Page 8: Troubleshooting Chart
TROUBLESHOOTING CHART SYMPTOMS PROBABLE CAUSES CORRECTIVE ACTION 1. Float valve turns on/off A. Flush valve seal worn, dirty or damaged. A. Inspect, clean and, if necessary replace seal. by itself without toilet being flushed 2. Float valve continues A. Foreign particles lodged under the float valve A. -
Page 9: Consumer Responsibilities
(calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage. Kohler Company shall not be responsible or liable for any damage to these tank fittings caused by the use of cleaners containing chlorine (calcium hypochlorite). - Page 10 ODEON SERVICE PARTS PAGE P/S- VITREOUS CHINA P/S-TRAP TOILET P-TRAP 180mm K-8711T S-TRAP 255mm K-8753T S-TRAP 305mm K-8766T Model K-8711T K-8753T K-8766T Bowl K-8709T K-11184T K-8767T Tank K-8710T K-8710T K-8710T Seat K-8741T-** K-8741T-** K-8741T-** 1004136-** Tank Cover 1004140 Flush Button Assy.