Thank You For Choosing Kohler Company We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start installation. If you encounter any installation or performance problems, please don’t hesitate to contact us.
Thread the gasket to the spray holder and securely hand tighten the nut to the shank from under the sink. Insert the handspray hose through the spray holder. Attach the hose to the shank tee using thread sealant. Kohler Co. 1004636-X01-A...
Install a washer and nut to the bottom of the valve bodies. Align the valve bodies so the copper tubing faces the outside. Wrench tighten the nuts. Connect and tighten the hoses to the shank tee. Kohler Co. 1004636-X01-A...
Turn on the hot and cold faucet handles. Run the water for about one minute to remove any debris. Turn off the hot and cold faucet handles. Reinstall the aerator by turning it clockwise until hand tight. Check for leaks. Kohler Co. 1004636-X01-A...