While it is possible to mount these products on any surface, it is best to secure them to a wall stud. Kohler Co. reserves the right to make revisions in the design of accessories without notice, as specified in the Price Book.
Use the following center-to-center dimensions to locate the holder base center point: • K-8724 Towel Bar - 610 mm. • K-8725 Towel Bar - 457 mm. • K-8726 Towel Ring Center the bottom edge of the wall bracket on top of the holder center ...
Page 4
Confirm that the wall bracket is level and plumb. Holder Sealant Towel Ring Towel Ring Holder Fit the towel ring holder assembly over the wall brackets, and pull down to secure in place. Apply a bead of sealant around the holder base. 1001671-X2-A Kohler Co.
Loosen the screws, and slide one or both wall brackets inward. Re-tighten the screws, and reattach the towel bar assembly. Apply a bead of sealant around the elbow bases. Kohler Co. 1001671-X2-A...