Tools Recommended; For Installation; Installation Hardware - KitchenAid KHMS 105 Installation Instructions Manual

'TOOLS RECOMMENDED FOR INSTALLATION
Phillips Screw -Driver
Electric Drill
5/8", 3/32" Drill Bit
l-1/2" Wood Bit
Pencil
Measure
Tape
Saw to cut exhaust opening (if needed)
Protective drop cloth for product and range. You may use part of carton for protectim.
INSTALLATION HARDWARE
The installation hardware ( @ - @ ) packed with the product should include the following:
NAME
QUANTITY
~ -~ -
I
@ Wood Screw 5x30mm
0 Toggle Bolts 3/16 inch
0 Screw 5x55mm
@ Flat Washer 30mm Dia.
0 Tapping Screw 4xl2mm
@ Power Cord Hanger
0 Grommet
@ Back Draft Damper