Operation And Important Riding Points; Starting The Engine - Yamaha FJR13AD(C) Owner's Manual

OPERATION AND IMPORTANT RIDING POINTS

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6
EAU15951
TIP
This model is equipped with:
● a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10271
case, the multi-function meter unit
indicates error code 30, but this is
not a malfunction. Turn the key to
"OFF" and then to "ON" to clear the
error code. Failing to do so will pre-
vent the engine from starting even
though the engine will crank when
pushing the start switch.
● an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. In this case,
the multi-function meter unit indi-
cates error code 70, but this is not
a malfunction. Push the start
switch to clear the error code and
to restart the engine.
EAU47150

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
●
●
1. Turn the key to "ON" and make
NOTICE
If a warning or indicator light does
not come on initially when the key is
turned to "ON", or if a warning or in-
6-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the
sidestand up.
See page 4-42 for more informa-
tion.
sure that the start/engine stop
switch is set to " ".
The following warning lights and
indicator lights should come on for
a few seconds, then go off.
●
Oil level warning light
●
Engine trouble warning light
● Traction control system indi-
cator/warning light
●
Cruise control indicator lights
EAU54750
ECA11833