Yamaha FJR13AD(C) Owner's Manual page 25

If the cruise control system is automati-
cally deactivated, please stop and con-
firm that your vehicle is in good
operating condition.
Before using the cruise control system
again, activate it using the power
switch.
TIP
In some cases, the cruise control sys-
tem may not be able to maintain the set
cruising speed when the vehicle is trav-
eling uphill or downhill.
● When the vehicle is traveling up-
hill, the actual traveling speed may
become lower than the set cruising
speed. If this occurs, accelerate to
the desired traveling speed using
the throttle.
● When the vehicle is traveling
downhill, the actual
speed may become higher than
the set cruising speed. If this oc-
curs, the setting switch cannot be
used to adjust the set cruising
speed. To reduce the traveling
speed, apply the brakes. When the
INSTRUMENT AND CONTROL FUNCTIONS
brakes are applied, the cruise con-
trol system will become deactivat-
ed.
Self-diagnosis device
1 2 3
1. Engine trouble warning light "
2. Cruise control system indicator light "
3. Cruise control setting indicator light "SET"
4. Error code display
The cruise control system will also be-
traveling
come deactivated when an irregularity
with any of the vehicle systems is de-
tected. The "SET" indicator light will go
off and the "
You will not be able to use the cruise
control system while the engine trouble
warning light is on, or while the cruise
control system is malfunctioning.
GEAR
N
A.TEMP ˚C
25
C.TEMP ˚C
Lo
TIME TRIP
0:06
4
"
"
" indicator light will flash.
4-7
WARNING
If the cruise control system is not
working correctly, the "
light will flash. If this occurs, turn the
cruise control system off and have a
Yamaha dealer check it.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
EWA16360
" indicator
ECA11590
4