Yamaha FJR13AD(C) Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS
2
1. Closed position
4
2. Cruise control cancel direction
● Apply the front or rear brake.
●
Disengage the clutch.
Push the power switch to turn off the
cruise control system. The "
tor light and the "SET" indicator light will
go off.
TIP
Traveling speed decreases as soon as
the cruise control system is deactivat-
ed; unless the throttle grip is turned.
Using the resume function
Push the "RES+" side of the cruise con-
trol setting switch to reactivate the
cruise control system. The traveling
speed will return to the previously set
cruising speed. The "SET" indicator
light will come on.
WARNING
1
It is dangerous to use the resume
function when the previously set
cruising speed is too high for cur-
rent conditions.
TIP
● The resume function operates
when riding in 3rd, 4th or 5th gear
at speeds between about 50 km/h
(31 mi/h) and 128 km/h (80 mi/h).
" indica-
●
Pushing the power switch while
the system is operating will turn
the system off completely and
erase the previously set cruising
speed. You will not be able to use
the resume function until a new
cruising speed has been set.
Automatic deactivation of the cruise
control system
The cruise control system for this mod-
el is electronically controlled and is
linked with the other control systems.
The cruise control system will automat-
ically become deactivated under the
following conditions:
●
EWA16350
●
●
●
●
When traveling with a set cruising
speed, if the cruise control system is
deactivated under the above condi-
tions, the "
and the "SET" indicator light will flash
for 4 seconds, and then go off.
When not traveling with a set cruising
speed, if the start/engine stop switch is
set to the "
stalls, or the sidestand is lowered, then
the "
"SET" indicator light will not flash).
4-6
The cruise control system is not
able to maintain the set cruising
speed.
Wheel slip or wheel spin is detect-
ed. (If the traction control system
has not been turned off, the trac-
tion control system will work.)
The start/engine stop switch is set
to the " " position.
The engine stalls.
The sidestand is lowered.
" indicator light will go off
" position, the engine
" indicator light will go off (the