INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the rider seat height
The rider seat height can be adjusted to
one of two positions to suit the rider's
preference.
The rider seat height was adjusted to
the lower position at delivery.
4
1. Low position
2. High position
To change the rider seat height to
the high position
1. Remove the rider seat. (See page
4-30.)
2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
EAU39632
1. Rider seat height position adjuster
3. Move the rider seat holder cover to
the lower position as shown.
1. Rider seat holder cover
4. Install the rider seat height position
adjuster so that the "H" mark is
aligned with the match mark.
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
1
1. Projection
2. Seat holder B (for high position)
3. Rider seat holder cover
4-32
the rider seat into seat holder B as
shown.