Related Manuals for Windsor PJ2A
Summary of Contents for Windsor PJ2A
- Page 1 PILEJOGGER II MODELS: PJ2A PJ2AIE 8603750 - G 03/04/08 PRV NO. 98018 8.604-176.0 8.604-177.0 Read instructions before operating the machine. Operating Instructions (ENG)
-
Page 2: Machine Data Log/Overview
For the name and address of your dealer contact: Windsor Industries Phone Number: _________________________________________________________________________________________ The PILEJOGGER can be operated with all Windsor® hot water soil extractors. If used with other machines, the extraction unit pump must produce a minimum of 25 psi. If the Pilejogger is be used with the Dominator Professional or other machines capable of 200psi, correctly sized stainless steel jets are required (order optional SS Jet Kit 86025360 -PRV NO.#47058). -
Page 3: Table Of Contents
Important Safety Instructions ...2-1 Hazard Intensity Level..2-2 Grounding Instructions...2-3 OPERATIONS How the Machine Works..3-1 MAINTENANCE Daily Maintenance..4-1 Machine Troubleshooting...4-1 Wiring Diagram..4-1 GROUP PARTS LIST Pilejogger Assembly..5-1 230V Service Parts..5-3 Warranty..5-4 86037500 PJ2A 03/04/08... -
Page 4: Daily Maintenance
The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. -
Page 5: Important Safety Instructions
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not pull/run machine over cord. Keep cord away from heated surfaces. Connect to a properly grounded outlet. See Grounding Instructions. SAVE THESE INSTRUCTIONS 86037500 PJ2A 03/04/08... -
Page 6: Hazard Intensity Level
Unless Operation Guide is Read and understood. In Flammable or Explosive areas. In areas with possible falling objects. WHEN SERVICING MACHINE: Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts. 86037500 PJ2A 03/04/08... -
Page 7: Extension Cords
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. 86037500 PJ2A 03/04/08 Check with a qualified... -
Page 8: Operations
5. Make the next cleaning pass beside the first, overlapping about 1 inch. 6. Reverse direction and clean balance of room. CAUTION: To prevent possible damage to the carpet, never let the PILEJOGGER stand in one place with the brush running. 86037500 PJ2A 03/04/08... -
Page 9: Daily Maintenance
Repair or replace Clean with steel wool and vinegar solution; wipe dry after each use. Make more than one pass at right angle to first pass. Prespray. Check vac system for leaks 86037500 PJ2A 03/04/08 MAINTENANCE... -
Page 10: Pilejogger Assembly
PILEJOGGER ASSEMBLY 86037500 PJ2A 03/04/08... -
Page 11: Pilejogger Assembly
KIT, VALVE REPAIR HOSEBARB, 1/4FPT X 1/4 CLAMP, 1/4ID HOSE HOSE, 1/4 X 43” (250PSI) CORD ASM, 18/3 X 40 SJT, YL PJ2A V7 CORD END, 125V 15A M NEMA5-15P WASHER, 1/4ID X 5/8OD SS SCR, 1/4-20 X 1.25 HHCS SS... -
Page 12: 230V Service Parts
230V SERVICE PARTS PART NO. PRV NO. 86247120 53147 86261060 23718 86001780 14308 DESCRIPTION MOTOR ASM, 230V DC PM CORD ASM, 1.0MM 3 X 40 HODVVF CIRCUIT BREAKER, .8A (230V) 86037500 PJ2A 03/04/08 NOTES: SERVICE ONLY SERVICE ONLY SERVICE ONLY...
Need help?
Do you have a question about the PJ2A and is the answer not in the manual?
Questions and answers