BOXLIGHT 9000-INT Manual page 46

M a i n t e n a n c e
WARNING: Do not drop the
lamp module or touch the glass
bulb! The glass may shatter and
cause injury.
38
a n d T r o u b l e s h o o t i n g
F 29
IGURE
Removing the lamp module
7 Align the new lamp module in the correct direction.
8 Gently push the module in as far as it goes.
9 Tighten the screws on the outside of the module.
10 Reposition the lamp cover.
11 Replace the screw and tighten it.
12 Plug in the power cord and turn the projector back on.
13 To reset the lamp hour counter in the Status bar, press and
hold the left mouse button, then press the menu button (while
still holding down the mouse button) for 5 seconds. Verify
that the counter was reset by pressing the menu button and
viewing the counter (see page 26).