Using The Remote Control - BOXLIGHT 9000-INT Manual

leveling knob

Using the Remote Control

Point the remote control at the projection screen or at the projec-
tor. The range for optimum operation is about 30 feet. If you
point the remote at the projection screen, the distance to the
screen and back to the projector must be less than or equal to
30 feet. For best results, point the remote directly at the projector.
If you have purchased the optional CablePro and are creating
presentations in Microsoft
remote's mouse buttons to navigate through your presentation
while in Slide Show mode. To configure PowerPoint for this,
choose Options from the Tools menu, click the View Tab, de-select
the "Popup Menu on Right Mouse Click" option in the Slide
Show section, then click OK. Then, when you're in PowerPoint's
Slide Show mode, a left click advances to the next slide and a
right click returns to the previous slide (other PowerPoint modes
are not affected).
® ®
PowerPoint , you can use the
F 17
IGURE
Leveling knob
NOTE: If you can't aim the
remote control at the projector so
that its signal is received
example, when using rear projec-
tion or in a large auditorium
connect it directly to the projector
with the optional remote control
cable.
NOTE: If you want mouse control
of the Computer 3 input, purchase
the optional CablePro. If you want
mouse control of multiple sources,
purchase a third-party mouse.
—
for
—
21