Kenmore 116.33728 Owner's Manual page 14

TO REPLACE DUST BIN
First
align base of dust bin with tabs located
on the vacuum. Then rotate dust bin in
place making sure dust bin is securely
latched.
Occasionally deep cleaning of the filter may
be required.
Remove the dust bin as outlined in the
DUST BIN CLEANING section.
To deep clean dust bin filter, first remove it
from the dust bin by grasping and pressing
on either side of the filter as shown in the
illustration. Then remove
filter by pulling straight
out from dust bin.
Press.---..__
Here
Here
Remove cleaning tool from the cleaning tool
holder located on the side of the dust bin as
shown.
Dust-"
Bin
Too_Cleaning
Hold filter over a trash container. Insert
tool in filter element and brush debris
downward into the trash
container. Repeat Dust Bin
until filter is com-
pletely clean.
Cleaning
Tool
Trash
Container
To reinstall a new or cleaned filter into the
dust bin make sure the alignment tabs on
the filter are aligned with the alignment
notches located at the top and bottom of the
dust bin.
Press filter firmly into the dust bin making
sure that the locking tabs are
securely in place before
placing dust bin back in
the vacu-
um, Alignment---_
Notch
Alignment
Tabs
13
Filer