In Use - Rega Mira 3 Manual

Mira 3 manual.qxd 10/12/2002 11:24 Page 11
Mira
Remote sensor
Switching On
The Mira 3 is turned on by depressing the power switch on the left of
the control panel. The LED in the power switch will glow red.
After several seconds you may hear a gentle click. This indicates the
switch-on relay has been released and the amplifier is ready for use.
Volume Control
The volume of the amplifier can be adjusted using the volume knob
on the amplifier and via the remote control handset as described
below.
The volume level is controlled via a microprocessor, which in turn
takes its information from the volume knob digital encoder on the
front panel or the remote control handset.

In Use

Power switch & Volume Indicator LED's
power LED
Heatsink Volume Control/Input selector
Dimmer function
Tape switch
Ph ono
CD
Tape
Tun er
Lin e1
Mu te
L ine2
Mute switch/
10