Input Sensitivity And Pre-Amp Gain Level - Rega Mira 3 Manual

Mira 3 manual.qxd 10/12/2002 11:24 Page 22
Input sensitivity and pre-amp gain
The Mira 3 amplifier sensitivity or pre-amplifier gain can be set to
three different levels; this is performed by putting the amplifier in to
a programming mode on turning on the amplifier.
Please note the amplifier is set to normal sensitivity (level 2) in the
factory, this setting being suitable for all normal Hi-fi requirements.
Settings -
Sensitivity's for 61W into 8 Ohms
CD, tuner, Line 1, line 2, Tape input sensitivity
Gain range or level 1 sensitivity = 870mV
Gain range or level 2 sensitivity = 220mV (Factory setting)
Gain range or level 3 sensitivity = 150mV
Phono input sensitivity
Gain range or level 1 sensitivity = 8.5mV
Gain range or level 2 sensitivity = 2.1mV (Factory setting)
Gain range or level 3 sensitivity = 1.4mV
Pre-amplifier gain levels to pre-amplifier output.
Gain range or level 1 gain = 0dB (unity gain)
Gain range or level 2 gain = 11.5dB (factory setting)
Gain range or level 3 gain = 15dB
Any adjustments made to the power amp link switch and gain must
be carried out by an authorised Rega dealer.
If work is carried out by any person other than a Rega dealer it will
invalidate your warranty.
21