Bi-Amping - Rega Mira 3 Manual

Mira 3 manual.qxd 10/12/2002 11:24 Page 15

Bi-Amping

With the use of additional power amplifiers, the Mira 3 integrated
amplifier can be used in a bi-amping system, in conjunction with
suitable speakers. This system can also be made active by the use
of a suitable cross-over unit.
Use both pre-amp outputs into a stereo power amplifier, or the right
and left outputs into individual mono power amps, to drive
bass/midrange; and the speaker outputs on the integrated amplifier
to drive the tweeters.
If you are using a different pre-amplifier or an active cross-over, the
amplifier can be used as a stereo power amplifier by putting a line
level input into the power-amp in connectors, and using the speaker
outputs to drive the appropriate speaker. If you have any doubts
concerning bi-amping your system, consult your REGA dealer.
Remote Control
The Mira 3 features an optional remote control. This has additional
buttons not used by the Mira, but all functions offered on the amplifier
can be performed using the remote control.
14