Installation - Rega Mira 3 Manual

Mira 3 manual.qxd 10/12/2002 11:24 Page 4

Installation

The Mira 3 will work well on most surfaces, such as a shelf or a table,
provided there is sufficient air around it to prevent overheating.
To avoid magnetic interference, site the Mira 3 as far away from the
turntable as the tonearm lead will allow. If possible, place it to the left
of the turntable.
Keep other equipment, such as tuners, cassette decks or CD players
away from the amplifier. Never stack other hi-fi components on top of
the Mira 3.
Due to the layout of Rega's amplifier circuit designs, they are virtually
insusceptible to Electro Magnetic interference, and by virtue of the
extruded aluminium case, emit practically no Electro Magnetic
radiation.
However, placing any electronic equipment close together may
impair the performance of one or both of the items.
3