Pre-Amp Output And Power-Amp Input - Rega Mira 3 Manual

Mira 3 manual.qxd 10/12/2002 11:24 Page 7

Pre-Amp Output and Power-Amp Input

The Mira 3 has a pre-amplifier output & power-amplifier input, giving
total flexibility within the REGA range.
The pre-amplifier can drive at least 5 power amplifiers, sub bass units
etc, and the power amplifier can be used with most pre-amplifiers.
There is an internal link via a DIP switch between the pre-amp output
and power-amp input which can be turned off by moving the DIP
switch to the OFF position. If you are using only the pre-amp stage of
the Mira 3 in conjunction with a separate power-amplifier you may
want your dealer to move the switch to the off position.
The pre-amp outputs and power-amp input use RCA type (phono)
connectors.
Any adjustments made to the power amp link switch and gain must
be carried out by a authorised Rega dealer.
If work is carried out by any person other than a Rega dealer it will
invalidate your warranty.
6