Making Front-Panel Settings - Pace DC700X Operator's Manual

Hide thumbs Also See for DC700X:

Table of Contents

MAKING USER SETTINGS (cont.)

3 If you wish to reset all the Closed Caption settings to their default values (mainly Auto), press the D button to

highlight "Reset to Defaults" on the menu, then press SELECT.

4. When you have made all the changes you want, press L twice to redisplay the PACE USER SETTINGS menu.

Making Front-Panel Settings

You can use the Front Panel Settings menu to set the brightness level of the front-panel lights (but not the

POWER light) when your set-top is being used ("Viewing Brightness") and when it is switched off ("Standby

Brightness").

If you have not done so already, put your set-top into User Settings mode, as described on page 22.

1. Press the U or D button on your remote control and highlight Front Panel Settings on the PACE USER

SETTINGS menu.

2. Press the R button. The Front Panel Settings menu, shown right, appears on your TV screen.

3. Press the U or D button to highlight "Standby Brightness" and "Viewing Brightness" in turn, as required.

4. For each level, use the SELECT button to choose the setting you want: "Low", "Std" (Standard), or "High"

(the setting changes each time you press SELECT). Look at the dimming and brightening of the front-panel

lights while you are making the settings, to see the effect of your selections.

5. When you have made all the changes you want, press L to redisplay the PACE USER SETTINGS menu.

Front Panel Settings

Standby Brightness : Std

Viewing Brightness : High

Table of Contents