About The Tv Aspect Ratio - Pace DC700X Operator's Manual

MAKING USER SETTINGS (cont.)

About the TV Aspect Ratio

The TV that you have connected to your set-top has an aspect ratio (width-to-height ratio) of 4:3 (basic/standard)
or 16:9 (widescreen). You must set the appropriate TV Aspect Ratio (4:3 or 16:9) on your set-top, so that it is
compatible with your TV.
Setting the TV Aspect Ratio
If you have not done so already, put your set-top into User Settings mode, as described on page 22.
1. Press the U or D button on your remote control and highlight TV Aspect Ratio on the PACE USER SETTINGS
menu.
2. Press the R button. The current TV Aspect Ratio setting ("4:3" or "16:9"), shown below, appears on your
TV screen. Whenever the current setting is displayed, the MESSAGE light will be lighted. On the menu, the
current setting has > in front of it.
TV Aspect Ratio
4:3
>16:9
3. Press the U or D button until the TV Aspect Ratio you want appears on the TV screen.
4. Press the SELECT button to confirm your choice and change to that TV Aspect Ratio.
5. Press the L button. The PACE USER SETTINGS menu reappears.
To continue making the settings, see the next section.
4:3 standard TV,
EDTV or HDTV
16:9 HDTV
23