1. Manuals
  2. Brands
  3. Huffy Manuals
  4. Fitness Equipment
  5. 21147703
  6. Owner's manual

Huffy 21147703 Owner's Manual

Portable basketball system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
© COPYRIGHT 2000 by HUFFY SPORTS
Portable Basketball System

Owners Manual

Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
WARNING!
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO
PROPERTY.
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-333 061
Internet Address: http://www.huffysports.com
REQUIRED TOOLS AND MATERIALS
• Two People
• Wood Board (Scrap)
• Tape Measure
• Step Ladder 8 ft. (2.4 m)
• Tape
• Garden Hose or Sand 360 lb. (163 kg)
• Hammer
• Wrenches: (Two) 3/4", (One) 1/2" (Two) 9/16"or
equivalent sockets, (One) 1/2" Deep well socket
with extension and socket wrench, 3/8 socket
• Support Table
• Phillips Head Screwdriver
1
:
03/04
P/N 21147703

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 21147703 and is the answer not in the manual?

Questions and answers

Related Manuals for Huffy 21147703

Summary of Contents for Huffy 21147703

  • Page 1: Owners Manual

    • Phillips Head Screwdriver Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: http://www.huffysports.com 03/04 P/N 21147703 © COPYRIGHT 2000 by HUFFY SPORTS...
  • Page 2 (Do not use salt.) • Use extreme caution if placing system on sloped surface. System may tip over more easily. In the U.S.:1-800-558-5234 and Canada: 1-800-284-8339 201241 2/99 P/N 21147703 03/04...

  • Page 3: Safety Instructions

    Use caution when using this unit. NOTICE TO ASSEMBLERS ALL Huffy Sports basketball Systems, including those used for DISPLAYS, MUST be assembled and ballasted with sand or water according to instructions. Failure to follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift weight system.
  • Page 4 Get to know the basic parts of your basketball system..FRONT BACK BACKBOARD ELEVATOR TOP POLE ASSEMBLY BOTTOM POLE MIDDLE POLE STRUTS FRONT COVER BASE WHEEL CARRIAGE ASSEMBLY P/N 21147703 03/04...
  • Page 5 Smart Clips, Net Holder 205528 Bolt, Hex Flange, 5/16-18 x 1" Long WARRANTY CARD: Please remember to complete your product registration form either on-line at: * You may have extra parts with this model. www.huffysports.com/warrantycard or mail-in the enclosed postcard. 03/04 P/N 21147703...
  • Page 6 Item #22 (2) HARDWARE IDENTIFIER (NUTS, WASHERS & METAL SPACERS) Item #14 (2) Item #11 (21) Item #21 (7) Item #31 (4) Item #30 (2) Item #44 (4) Item #10 (18) Item #43 (2) Item #41 (4) P/N 21147703 03/04...

  • Page 7: Height Adjustment

    2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location. 4. Carefully rotate basketball system upright. 5. Reattach ground restraint and check system for stability. 201252 2/99 Item #42 (1) 03/04 P/N 21147703...

  • Page 8: Before You Start

    Verlängerungsvorrichtung und die verschiedenen Befestigungsteile fest miteinander verschraubt werden. Große Schrauben zur Probe in die großen Löcher der Verlängerungsrohre, Korbwandklammern und Dreiecksplatte stecken und diese vorsichtig in einer Kreisbewegung hin- und herbewegen, um eventuelle Farbrückstände aus den Bohrungen zu entfernen. P/N 21147703 03/04...

  • Page 9: Section A: Assemble The Poles

    SECTIONS SHOULD HAVE A 3-1/2" 3-1/2" (9 CM) MINIMUM MINIMUM OVERLAP, LEAVING 1- OVERLAP. 1/2" BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER. IDENTIFICATION STICKER POLE pole middle IDENTIFICATION 5" MARK IDENTIFICATION STICKER pole middle 1-1/2" WOOD SCRAP (NOT SUPPLIED) 03/04 P/N 21147703...
  • Page 10 RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE IMPORTANT!: Holes in top (1) and bottom pole (3) sections MUST align to correctly position WOOD SCRAP elevator system toward (NOT SUPPLIED) playing surface. P/N 21147703 03/04...

  • Page 11: Section B: Assemble The Base

    (not actual size) (2) 1/2” AND (2) 9/16" Wrenches Item #13 AND/OR (2) Socket Wrenches and Sockets Item #9 Item #14 Item #15 Item #17 Item #11 1/2” 9/16” a Hammer or Mallet Item #10 Item #7 03/04 P/N 21147703...
  • Page 12 FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. THE CUT CORNERS OF THE POLE BRACKET NEED TO FACE TOWARD THE BACK OF THE BASE AS SHOWN. IMPORTANT!: DO NOT OVER TIGHTEN P/N 21147703 03/04...
  • Page 13 WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. IMPORTANT!: Rotate non-secured ends of tank struts (16) outward to mounting holes in tank as shown.Secure ends of tank struts (16) to tank as shown. Repeat for opposite side. 03/04 P/N 21147703...
  • Page 14 (7). Carefully tap pushnuts onto axle with hammer or mallet IMPORTANT!: SIDE OF WHEEL WITH LONGER PLASTIC AXLE NEEDS TO FACE THE WHEEL BRACKET. Install wheel assembly to base (8) using bolts(9), washers(10) and nuts (11) as shown. P/N 21147703 03/04...

  • Page 15: Section C: Assemble The Elevator & Backboard

    (2) 1/2”, (2) 9/16"” AND (2) 3/4” Item #29 Wrenches Item #54 Item #19 Item #21 AND/OR Item #50 (2) Socket Wrenches and Sockets Item #31 Item #24 Item #11 Item #59 Item #44 1/2” 3/4” 9/16” Item #22 Item #43 Item #30 03/04 P/N 21147703...
  • Page 16 Install pole mount bracket (28) and reinforcement bracket (18) with carriage bolts (22) as shown. Tighten flange nuts (11) completely. Attach spacers (24, 43) to pole mount bracket (28) with bolts (29), washers (44), and lock nuts (31) as shown. IMPORTANT! Tighten just until washers (44) stop moving. P/N 21147703 03/04...
  • Page 17 (52, 53) to adjustment rod with screw (55), carriage bolts (54), and flange nuts (11) as shown. IMPORTANT!: Indicator labels should be applied as close to holes as possible to prevent labels from being damaged during height adjustment. 03/04 P/N 21147703...
  • Page 18 Lock pole assembly in place at the 10’ (3.05 m) mark with pin (27). Assemble backboard brackets (45) using spacers (30), bolts (29), and nuts (31) as shown. IMPORTANT!: KEEP HARDWARE LOOSE UNTIL AFTER STEP 8 IS COMPLETED. Face of Backboard P/N 21147703 03/04...
  • Page 19 (45) using spacers (46 & 49), bolt (50), and nut (21) as shown. NOTE: Rim mounting nuts and bolts supplied with rim hardware. NOTE: DO NOT use washers here on spring return style rims. Refer To Instructions Included With Rim Hardware For Rim Assembly. 03/04 P/N 21147703...
  • Page 20 Attach upper elevator tubes (33) to backboard support brackets (45) using spacers (46 & 49), bolt (50), and nut (21) as shown. IMPORTANT!: TIGHTEN ALL HARDWARE FROM STEP 6 - 8 AFTER THIS ASSEMBLY IS COMPLETED. P/N 21147703 03/04...
  • Page 21 Install upper elevator tubes (33) to triangle plates (32) as shown. Install handle assembly to lower elevator tubes (34) using bolt (50), spacers (20), and nut (21) as shown. NOTE: Before going on to next step, set adjustable system assembly to the 10’ (3.05 m) setting. 03/04 P/N 21147703...
  • Page 22 Insert bolt (50) through left side upper elevator tube (33), then stretch spring (48) onto bolt (50). Insert bolt (50) through right side upper elevator tube (33) and secure with nut (21). WARNING! USE EYE PROTECTION WHEN INSTALLING SPRINGS. P/N 21147703 03/04...

  • Page 23: Section D: Securing The System

    ADD TWO GALLONS (7.6 WHEN EMPTY; IT MAY TIP LITERS) OF NON-TOXIC OVER. ANTIFREEZE IN SUB- FREEZING CLIMATES. WARNING! TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. 03/04 P/N 21147703...

  • Page 24: Section E: Install Front Cover

    Install front cover (38) by lining up stand-offs along the tank struts. Insert a tie strap (39) through the top two and bottom two stand offs. Wrap tie straps around tank struts as shown and secure tightly. Trim excess of tie strap as shown in FIG.A. STANDOFFS FIG.A P/N 21147703 03/04...

  • Page 25: Section F: Net Installation

    Push in direction indicated by arrows. Push second “arm” back and into ram as shown. Twist “body” of clip slightly again to spread “arms” of clip. Clip “arms” must be flat and touching edge to edge as shown, not overlapping. 03/04 P/N 21147703...
  • Page 26 SIDE VIEW NETCLIP Insert net into bottom of clip as shown. SIDE VIEW Twist net until it snaps into position. Net must be centered through clip. NETCLIP P/N 21147703 03/04...

  • Page 27: Section G: Apply Height And Moving Label

    2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location. 4. Carefully rotate basketball system upright. 5. Reattach ground restraint and check system for stability. 201252 2/99 03/04 P/N 21147703...
  • Page 28 SECTION H: HEIGHT ADJUSTMENT A. While holding handle, remove pin (27). B. Move elevator up or down to desired height. C. Replace pin (27) full length to lock system at desired height. WARNING! DO NOT ALLOW CHILDREN TO ADJUST HEIGHT. P/N 21147703 03/04...

Table of Contents