11.
Attach pole assembly to pole bracket (10) as
shown. NOTE: Keep unnecessary pressure off
of the pole assembly when in this position. Two
people recommended for this step.
12
P/N 211387
5/99
8
21
22
20
13.
Attach lower halves of backboard
brackets (23) to swivel bracket (21).
NOTE: Keep hardware loose until
after alignment in step 16.
10.
Rest pole assembly on FILLED tank.
13
8
12.
Attach upper pole mounting bracket (20) to swivel
bracket (21) and fully tighten.
12
6
WARNING
KEEP UNNECESSARY
PRESSURE OFF OF THE
POLE ASSEMBLY WHEN IN
THIS POSITION. TWO
PEOPLE RECOMMENDED
FOR THIS STEP.
10
23
13
21
13
19
12
printed on recycled paper