Huffy 211387 Owner's Manual page 3

IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
1.
Remove contents from tank (1).
2.
Turn tank (1) bottom side up. Insert axle rod (2)
through wheel (3), as shown. Secure wheel assembly
to tank by tapping wheel assembly downward with
hammer. It will snap into position. Repeat for opposite
side, then carefully turn tank over.
3.
Correctly identify each pole section and
mark indicated distance from end of
bottom pole section (4) with tape as shown.
5
Slide top of upper pole section (5) through bottom of middle pole section (6). Secure top
4.
and middle pole sections together in both locations as shown, using carriage bolts (7),
washers (8), adjustment knob (9), and flange nut (13).
IMPORTANT!
6
printed on recycled paper
TOP
This step MUST be completed before going on to step 5.
"Bottom of middle
pole section"
5 6
5
NOTE:
Top pole section will slide
through middle pole section.
2
3
6
MIDDLE
"Top of upper
pole section"
7
9
8
13
7
3
1
4
BOTTOM
5"
(13 cm)
5
6
8
5/99 P/N 211387