Selecting The Sound Mode - Toshiba DVR D-R17DTKB Owner's Manual

E7J70BD_EN.book Page 36 Monday, May 7, 2007 3:31 PM

Selecting the Sound Mode

This unit can receive bilingual broadcasts.
You can switch between modes by pressing
[AUDIO ] on the remote control. Each mode is
indicated on the TV. When you record a DVB channel,
only output sound channel will be recorded.
Setting External Input Audio
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
D D VD+R DVD+R VD+R
When the external input audio is a bilingual
broadcast, you can choose "Stereo" or "Bilingual" to
record on a DVD. This setting is only for recording
external input (AV1/AV2/AV3).
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER/OK].
2
Select "Recording" using [U / D],
then press [ENTER/OK].
3
Select "External Input Audio" using
[U / D], then press [ENTER/OK].
General Setting
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
4
Select "Stereo" or "Bilingual" using
[U / D], then press [ENTER/OK].
General Setting
Playback
Display
Video
Recording
External Input Audio
Clock
Channel Stereo
Bilingual
DivX
HDMI
Reset All
5
Press [SETUP] to exit.
Hint
• If you select "Stereo":
The audio will be recorded as "stereo audio".
• If you select "Bilingual":
The audio will be recorded as "bilingual audio" (see
"Setting Bilingual Recording Audio" for more detail).
36
EN
DVD-R DVD-R D D VD+R DVD+RW VD+RW W
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Setting Bilingual Recording Audio
Video
DVD-RW DVD-RW DVD-R DVD-R D D VD+R DVD+RW VD+RW W
You can select either "Main" or "Sub" audio to record a
bilingual broadcast in Video mode or +VR mode.
This setting is only for recording analogue channel.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER/OK].
2
Select "Recording" using [U / D],
then press [ENTER/OK].
3
Select "Bilingual Recording Audio"
using [U / D], then press
[ENTER/OK].
4
Select "Main" or "Sub" using
[U / D], then press [ENTER/OK].
General Setting
Playback
Display Auto Chapter
Video Recording Audio Select (XP)
Recording Auto Finalise
Bilingual Recording Audio
Clock Aspect Ratio (Video mode)
Channel Main Make Recording Compatible
Sub
DivX Bilingual Recording Audio
HDMI External Input Audio
Reset All
5
Press [SETUP] to exit.
Note
• If you are recording onto a VR mode disc, both
"Main" and "Sub" will be recorded regardless of your
setting here. And when you play back, you can
choose either audio format or a combination of both
as your playback audio.
Recording Audio Select (XP)
Video VR
DVD-RW DVD-RW DVD-RW DVD-RW DVD-R DVD-R
DVD+R D D VD+R VD+R
You can enjoy high quality sound recording. This
function works only when the recording mode is set at
XP.
1
In stop mode, press [SETUP]. Select
"General Setting" using [U / D],
then press [ENTER/OK].
2
Select "Recording" using [U / D],
then press [ENTER/OK].
3
Select "Recording Audio Select
(XP)" using [U / D], then press
[ENTER/OK].
DVD+R D D VD+R VD+R
DVD+RW D D VD+R VD+RW W