Edit Channels - Toshiba DVR D-R17DTKB Owner's Manual

23_31_BasicSetup_EN.fm Page 26 Tuesday, July 17, 2007 1:14 PM
Manual Tuning (DVB)
DVB
You can preset a DVB channel manually and
individually.
1
Follow steps 1 to 3 in "Auto Tuning
(DVB)" on page 25.
2
Select "Manual Tuning" using
[U / D], then press [ENTER/OK].
3
Select your desired position number
using [U / D], then press
[ENTER/OK].
Manual Tuning (DVB)
Channel
• The tuner will begin to search up or down
automatically. When a DVB channel is found,
the unit will stop searching.
• When "Auto" is selected the unit will search for
the channels which have not been stored in
channels memory.
4
Press [GREEN] to activate the
setting.
To Select a Channel
You can select memorised channels by using
[PROG. / ]. For DVB channels you can use the
favourite lists (TV1-TV4) to loop channels only within
the favourite list. (See "TV Title List" on page 27.)
You can select a channel using [PROG.
directly enter the channel using [the Number
buttons] on the remote control.
Notes on using [the Number buttons]:
• For one or two digit number channels, the channels
will be identified 2 seconds after you press the
channel number, or right after you press
[ENTER/OK]. For example, if you want to select
channel 6, press [6] and wait for 2 seconds or press
[ENTER/OK]. You can only select channels 1 to
999.
• Analogue channels will be stored in channel 901-
999 and DVB channels will be stored in channel 1-
900 after it is scanned by this unit.
26
EN
To switch DVB, analogue and external input (AV1/
AV2/AV3) mode.
You can switch between DVB, analogue and external
input (AV1/AV2/AV3) mode by pressing [INPUT
SELECT
follows:
DVB mode
• You can also switch the mode by using
[PROG.
• You cannot select any DVB channels using
[the Number buttons] when you are in analogue or
external input (AV1/AV2/AV3) mode.
• You cannot select any analogue channels using
[the Number buttons] when you are in DVB mode.

Edit Channels

With the EDIT CHANNELS screen, you can see all
memorised DVB channels, create favourite lists, and
set the viewer limitation to channels (Adult lock).
To display EDIT CHANNELS screen, after following
steps 1 to 3 in "Auto Tuning (DVB)" select "Edit
Auto
Channels" using [U / D], then press [ENTER/OK].
Guide to EDIT CHANNELS screen
1 Channel numbers.
2 Appears when the channel is locked for the
3 Channel names.
4 Type of displayed TV title list.
/ ], or
5 Indicates the registered favourite list number
The EDIT CHANNELS screen consist of list of the all
memorised DVB channels (TV LIST), and four
favourite lists (TV1 - TV4). You can switch between
those channels by pressing [GREEN] repeatedly.
CH List
(TV List)
• If the favourite list does not have any channels, the
list will be skipped.
• If there are more than one page of the CH List (TV
List) or the favourite list (TV1 -TV4), you can turn the
pages by using [L / P].
Note
• You cannot select "Edit Channels" when you are in
analogue, or external input (AV1/AV2/AV3) mode.
• If you execute the Auto Tuning for DVB channels,
the setting in the EDIT CHANNELS screen will be
cleared.
] repeatedly. The mode changes as
Analogue mode AV1
/ ].
EDIT CHANNELS
# NAME
1 Channel1
2 Channel2
3 L Channel3
1 Channel4
5 Channel5
6 L Channel6
7 Channel7
8 Channel8
TV LIST
ADULT LOCK
2 3 4
Adult Lock.
for the channels.
Favourite Favourite Favourite
List List List
(TV 1) (TV 2) (TV 3)
AV2 AV3
1 2 3 4
1 2 4
1 3
1
2 3
1
5
Favourite
List
(TV 4)