Switching Camera Angles; Reducing Block Noise - Toshiba DVR D-R17DTKB Owner's Manual

E7J70BD_EN.book Page 61 Monday, May 7, 2007 3:31 PM

Switching Camera Angles

DVD-V DVD-V
Some DVD-Videos feature scenes shot from two or
more angles. The disc case is usually marked with an
angle icon if the disc has multi-angle scenes.
1
During playback, press [DISPLAY].
The angle icon appears when a switching camera
angle is available. (Available only when the angle
icon appears in bottom right on the TV screen.)
2
Select the
then press [ENTER/OK].
The angle will switch each time you press
[ENTER/OK].
Hint
• If the Angle Icon setting is "OFF" in the Setup menu,
the icon will appear only when the disc is played
back and the Display menu appears. (See page 73.)
• Even when the icon is not displayed, you can
select the angle if the currently played back title has
at least two multi-angle scenes.

Reducing Block Noise

Video
DVD-V DVD-V DVD-RW DVD-RW
D D VD+R DVD+RW VD+RW W D D VD+R DVD+R VD+R
1
During playback, press [DISPLAY].
2
Select the
then press [ENTER/OK] within 1
second, or wait for 1 second to
display the selection menu.
Noise Reduction menu will appear.
3
Select the desired option using
[U / D], then press [ENTER/OK].
This function reduces noise in the playback picture.
When playing back discs recorded in long time modes
such as EP or SLP, select "Type 1" or "Type 2".
"Type 2" is more effective.
When playing back discs with a little noise, such as
DVD-Videos, select "OFF".
icon using [L / P],
VR
DVD-RW DVD-RW DVD-R DVD-R
VCD VCD VCD DivX DivX DivX ®
®
icon using [L / P],
61
EN