Language Setting - Toshiba DVR D-R17DTKB Owner's Manual

23_31_BasicSetup_EN.fm Page 30 Tuesday, July 17, 2007 1:13 PM

Language Setting

DVB
1
Follow steps 1 to 2 in "PINCODE
Setting for Adult Lock" on page 29.
2
Select "Language" using [U / D],
then press [ENTER/OK].
3
Select the item you want to change
the language using [U / D], then
press [ENTER/OK].
DVB Menu
Adult Lock
Language
Service Preference
About
Reset All
Audio : Set the Audio language
Subtitle : Set the Subtitle language
Data Service: Set the Digital Teletext language
4
Select a language using [U / D],
then press [ENTER/OK].
5
Press [SETUP] to exit.
Note
• You can also change the audio language using
[AUDIO ] if it is available.
• The Audio, Subtitle and Digital Teletext language
setting may not be available for some broadcast.
Service Preference Setting
DVB
Set whether you receive the Teletext or Subtitle
information from the DVB.
1
Follow steps 1 to 2 in "PINCODE
Setting for Adult Lock" on page 29.
2
Select "Service Preference" using
[U / D], then press [ENTER/OK].
3
Select a desired information to
receive using [U / D], then press
[ENTER/OK].
4
Press [SETUP] to exit.
Note
• This unit supports MHEG5 data service.
• This unit does not support MHP data service.
30
EN
Audio
Subtitle
Data Service
About
DVB
You can check the current DVB system software
version of this unit.
1
Follow steps 1 to 2 in "PINCODE
Setting for Adult Lock" on page 29.
2
Select "About" using [U / D], then
press [ENTER/OK].
3
Press [SETUP] to exit.
Note
• Whenever a new software is available, it is
advisable to always accept and download the
software. In case new software is available, you will
see a message when you switch on the DVB
channel.
UPDATE
YOUR CURRENT SOFTWARE IS VERSION
1.00. VERSION 2.00 IS AVAILABLE FOR
UPDATE. UPDATING IS RECOMMENDED.
DO YOU WISH TO UPDATE?
NO YES
Resetting the DVB Menu Setting to
Default
DVB
1
Follow steps 1 to 2 in "PINCODE
Setting for Adult Lock" on page 29
2
Select "Reset All" using [U / D],
then press [ENTER/OK].
3
Select "Yes" using [U / D], then
press [ENTER/OK].
DVB Menu
Adult Lock
Language
Service Preference
About Reset to factory default?
Reset All
Yes
No
"Are you sure?" will appear. Select "Yes" using
[U / D], and then press [ENTER/OK].
4
Press [SETUP] to exit.
Note
• The PINCODE for Adult Lock will remain unchanged
even after resetting the DVB Menu setting to default.