Table of Contents
Advertisement
1. Update Contents
Item
1
B/E
Update B/E FIRMWARE
2
F/E
Update F/E FIRMWARE
2. Update
1. Turn the power on and remove the disc in the tray.
2. To switch the HDD & DVD into the HDD mode,
press [HDD] on the remote control unit.
3. To put the HDD & DVD into version up mode,
press [VARIABLE SKIP] and [6], [5], [4] buttons on
the remote control unit in that order within 3
seconds. The tray will open automatically.
Fig. a appears on the TV screen and Fig. b
appears on the VFD.
*FIRMWARE version will differ depending on the
model. Fig. a is an example.
DISC UPDATE
Please Insert F/W Disc
Fig. a: Update Mode TV Screen
Fig. b: VFD Display in Update Mode
FIRMWARE RENEWAL MODE
Status
4. Load the update disc.
The TV screen will display Fig. c.
- If the update disc contains only a single file, the
update will initiate automatically when the disc is
inserted.
*FIRMWARE version will differ depending on the
model. Fig. c is an example.
T3T00361B2S.MOT
<DIR>
BE
<DIR>
FE
Fig. c: Update Disc TV Screen
Effective FIRMWARE update files will have the file
extensions shown below.
File extension
MOT
5. Select the desired FIRMWARE to be updated with
the arrow button and press the [ENTER] or [PLAY]
button.
The tray will open automatically; close the tray by
pressing [OPEN/CLOSE] button or by hand.
6. Fig. d appears on the TV screen and Fig. e
appears on the VFD, and the update will start.
*FIRMWARE version will differ depending on the
model. Fig. d is an example.
*1
TARGET: B/E
*2
STATUS: EXECUTING
Fig. d: TV Display during update
The status displayed in *1 is as shown below.
Display
B/E
FIRMWARE B/E
F/E
FIRMWARE F/E
UNKNOWN
Not FIRMWARE B/E or F/E
1-10-1
DISC UPDATE
Status
F/E FIRMWARE file
DISC UPDATE
DISC UPDATING
Status
E3B90FW
Hide quick links:
Advertisement
Table of Contents
