Connections - Toshiba DVR D-R17DTKB Owner's Manual

E7J70BD_EN.book Page 19 Monday, May 7, 2007 3:31 PM

Connections

Connections
Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.
Before installation, plug off your TV and this unit.
Using the Scart socket
1
Make a connection for the TV signal.
Depending on the TV signal's
situation, choose one of following
methods (A-C).
A: Receiving DVB-T signal:
If you are in a area that DVB-T signals are available,
connect the antenna or cable to the ANTENNA IN
(DVB-T) jack of this unit, then connect the ANTENNA
OUT (DVB-T) jack of this unit to the Aerial jack of your
TV. Use the supplied RF cable.
Antenna
Cable
Signal
or
To Aerial jack of your TV
RF cable
(not
supplied)
RF cable
(supplied)
B: Receiving ANALOG signal:
If you are in a area that DVB-T signals are not
available, connect the antenna or cable to the
ANTENNA IN (ANALOG) jack of this unit, then
connect the ANTENNA OUT (ANALOG) jack of this
unit to the Aerial jack of your TV. Use the supplied
RF cable.
Antenna
Cable
Signal
or
RF cable
(not supplied)
RF cable
(supplied)
IN
Y
P /C
B B
OUT
P R /C R
DVB-T ANALOG
COMPONENT ANALO
ANTENNA
VIDEO OUTPUT AUDIO O
To Aerial jack of your TV
IN
Y
P /C
B B
OUT P /C
R R
DVB-T ANALOG
COMPONENT ANALO
ANTENNA
VIDEO OUTPUT AUDIO O
C: Receiving both DVB-T and ANALOG signal:
If you need to receive both DVB-T and ANALOG
signal (for hotels that send out cable and DVB-T
signals together etc.), connect the antenna or cable to
the ANTENNA IN (DVB-T) jack of this unit, and
connect the ANTENNA OUT (DVB-T) jack to the
ANTENNA IN (ANALOG) jack of this unit, then
connect the ANTENNA OUT (ANALOG) jack to the
Aerial jack of your TV.
Antenna
Cable
Signal
RF cable (not supplied)
or
RF cable
(not supplied)
To Aerial jack of your TV
2
After you made a connection for the
TV signal, connect AV1 (TV) Scart
socket of this unit to the Scart
socket of your TV. Use a
commercially available Scart cable.
Audio/Video cable
(not supplied)
Scart/RCA
cable
(not supplied)
or or
Scart adaptor
(not supplied)
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
HDMI OUT
L
R
AV2 (DECODER) AV1 (TV)
NT ANALOG
PUT AUDIO OUT
Note
• If your TV does not have a Scart socket, use a
commercially available Scart adaptor or Scart/RCA
cable to connect.
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the copy protection system.
• When changing the "Video Out" setting ("SCART
(RGB)", "Component Interlace (I)" or "Component
Progressive (P)"), connect to the corresponding jack
on the TV. If the setting is changed, for example, to
"Component Interlace (I)" or "Component
Progressive (P)" while the scart cable is connected
to the TV, a distorted video signal may be output.
IN
Y
P /C
B B
OUT
P R /C R
DVB-T ANALOG
COMPONENT ANALO
ANTENNA
VIDEO OUTPUT AUDIO O
RF cable
(supplied)
Scart cable
(not supplied)
19
EN