Connecting External Components; Connecting The Ac Power Cord - JVC TH-D51 Instructions Manual

Connection using the component
video jacks
From component
video input
TV
Component video
cord (not supplied)
If your TV does not support progressive video input,
connect a TV via the AV (scart) connector (see
below).
For the BNC connection, use a plug adapter (not
supplied).
Connection using the scart connector
Scart cable
(not supplied)
TV
To scart connector
*
Some TVs' scart connectors emit audio signals. In such a
case, you can enjoy the TV sound through this System by
selecting TV SOUND as the source to play. (
No sound signal comes out from the AV (scart)
connector.

Connecting external components

,
Select "VIDEO" as the source (
a component connected as follows.
Available video output terminals for each source
Source
Terminal
HDMI
COMPONENT
AV (scart)
Green
Blue
Red
*
10)
10) for playing
DVD
USB
√
√
√
(Composite signal only)
Do not connect the power cord
until all other connections have
been made.
Video connection
Composite video cord
VCR, etc.
A From composite video output
B From S-video output
To view a video from the external component
connected as above:
– Connect a TV via the AV (scart) connector (see
the left column).
– Select an appropriate video input setting
according to the video connection. (
Audio connection
Connecting a digital component
Digital optical cable
(not supplied)
STB (Set Top
From digital optical output
Box), etc.
Select "OPT" as the audio input setting before
playing back. ( 13)
Connecting an analog component
RCA pin plug cord
(not supplied)
VCR, etc.
From audio output
Select "2CH" as the audio input setting before
playing back. ( 13)

Connecting the AC power cord

Plug in the System only after all other connections have
been completed.
√: Available
IPod
—
—
√
(not supplied)
or
S-video cord
(not supplied)
Align the
5
marks.
13)
—: Not available
VIDEO
—
—
√
(Composite signal only)
8