Connecting External Components - JVC TH-D7 Instructions Manual

Getting started
Connection using the component
video jacks
From component
video input
TV
Component video
cord (not supplied)
Do not connect the TVs via both the COMPONENT
jacks and HDMI MONITOR OUT terminal at the
same time.
For the BNC connection, use a plug adapter (not
supplied).
Connection using the S-video or
composite video jack
Composite video cord
TV
S-video cord (not supplied)
A From Composite video input
B From S-video input

Connecting external components

,
Connection for "VIDEO1"—TH-D7
Select "VIDEO1" as the source (
playing a component connected as follows.
Video connection
HDMI cable
(not supplied)
DVD player,
etc.
From HDMI video output
To view a video from the external component
connected as above, connect a TV via the HDMI
MONITOR OUT terminal. (
No sound signal comes into HDMI VIDEO 1 IN
terminal. Make audio connection to listen to the
sound (see the right column).
9
Green
Blue
Red
(supplied)
or
Align the
marks.
5
12) for
8)
Audio connection
Connecting a digital component
Digital coaxial cable
DBS (Direct
(not supplied)
Broadcast
Satellite)
tuner, etc.
Digital optical cable
(not supplied)
A From digital coaxial output
B From digital optical output
The initial setting for the audio input setting is
"COAX." When using OPTICAL terminal, change the
setting to "OPT" before playing back. (
Connecting an analog component
RCA pin plug cord (not supplied)
DVD player,
etc.
A From center channel audio output
B From front left/right channel audio outputs
C From subwoofer output
D From surround left/right channel audio outputs
To listen to the sound from AUDIO MULTI IN jacks,
perform the following procedure:
– Place the speakers by following "Speaker layout
A" ( 7).
– Select "S.SPK R" as the speaker position mode.
( 13)
Select "5.1CH" as the audio input setting before
playing back. ( 14)
Connection for "VIDEO2"—TH-D7
Select "VIDEO2" as the source (
playing a component connected as follows.
Video connection
Composite video cord
VCR, etc.
A From composite video output
B From S-video output
*
Connect an external component with the same kind of cable
as the one used to connect the TV. (see the left column)
14)
12) for
*
(supplied)
or
*
S-video cord
(not supplied)
Align the
marks.
5