HP ® xw9400 Setup Manual page 41

Lucid ADA 88192 Converter Settings for Remote Control
You must configure the following settings to control the converter remotely. Any setting not
listed here either has no effect with the application or can be set through the audio preferences
of the application.
Menu
ADAT
AES
Analog
Analog INs: SoftClip
Meter
System
Miscellany
Lucid ADA 88192 Converter Settings for Local Control
You must configure the following settings to control the converter locally. Any setting not listed
here either has no effect with the application or can be set to any of the values available for it.
Menu
ADAT
AES
Analog
Analog INs: SoftClip
Analog
Analog INs: Gain
Analog
Analog OUTs: Level
Meter
Menu Item
ADAT INs: SRC ON
ADAT INs: SMUX OFF
AES IN1+2: SRC OFF
AES IN3+4: SRC OFF
AES IN5+6: SRC OFF
AES IN7+8: SRC OFF
IN1+2: SoftClip OFF
IN3+4: SoftClip OFF
IN5+6: SoftClip OFF
IN7+8: SoftClip OFF
Clip Detect: 3
Route Unit: 8
Menu Item
ADAT INs: SRC ON
ADAT INs: SMUX OFF
AES IN1+2: SRC OFF
AES IN3+4: SRC OFF
AES IN5+6: SRC OFF
AES IN7+8: SRC OFF
IN1+2: SoftClip ON
IN3+4: SoftClip ON
IN5+6: SoftClip ON
IN7+8: SoftClip ON
set each input channel to a
value in the range
-95.5 to +31.5 dB
set either -10 or +4 for each
output channel
Clip Detect: 3
Configuring the Lucid ADA 88192 Converter
Comment
3 is the recommended setting
8 is the recommended setting
Comment
3 is the recommended setting
35