HP ® xw9400 Setup Manual page 27

While Autodesk Media & Entertainment makes no certification statement about any device, the
following SCSI devices have been tested and found to be reliable when connected using an
ATTO Fibre Channel to SCSI Bridge 2390:
•
Quantum LT03
•
Quantum DLT8000
•
Quantum DLT7000
•
Sony™ AIT3 SDX-D700C
•
Sony AIT2
Configuring the Archiving Device
The software initialization file (init.cfg) for your Effects or Editing 2008 application contains
examples of the use of the ClipMgtDevice Tape keywords. Use them to select a block size value
for your tape device, as well as to select a text label that identifies the device in the Archiving
module. Refer to the Configuration File Reference Guide for your operating system for additional
information.
You should also refer to the documentation from your archiving device vendor for guidelines
on the actual block size to use.
Connecting Archive Storage
21