Conference; To Establish A Broker Call; To Answer A Camped-On Call - NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual

CONFERENCE

STEP 1: With call in progress, ask party to hold.
STEP 2: Press
Transfer
tone.
STEP 3: Dial desired number.
STEP 4: After call is answered, press
LED lights.
STEP 5: Three-way conference is established.
CONF
1:25 PM
Note:
The Conf key is accommodated on only DTL-2E-
1, ITL-2E-1 and DTL-6DE-1. If using the termi-
nals without
grammable feature key to which conference
feature has been assigned.
Using Soft Key
STEP 1: With a call in progress, press
dial desired number.
STEP 2: After call is answered, press CONF Soft Key.
Three-way conference is established.
CONF
1:25 PM
MIC
STEP 3: If one party hang up, other two remain con-
DT730/710 DT330/310
key, receive interrupted dial
key. The
Conf
MON 12 JUL 2010
Conf key, use a soft key or pro-
Transfer
MON 12 JUL 2010
>>>

TO ESTABLISH A BROKER CALL

DT730/710 DT330/310
STEP 1: While engaged in a call and wishing to con-
STEP 2: Dial desired party to consult.
STEP 3: Press
STEP 4: By repeating these steps, it is possible to al-
Note:

TO ANSWER A CAMPED-ON CALL

DT730/710 DT330/310
key and
STEP 1: While engaged in a call, receive the camp-on
STEP 2: Press
STEP 3: Connection to camped-on call is established.
STEP 4: Press
144
nected. Conf LED goes out.
sult a third party, press
automatically placed on hold.
key to return to original caller.
Transfer
Third party is automatically placed on hold.
ternate between calls.
The display indicates connected station or trunk
at any given time.
indication (one short tone burst). LED of
key flashes.
Answer
key. Call in progress is placed
Answer
on hold.
key to return to original call.
Answer
Camped-on call is placed on hold.
key. Caller is
Transfer