NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual page 80

• TO CHANGE PASSWORD
To change an existing password, follow the procedure
below. This password is used for the following
occasions.
• To lock/unlock the telephone.
• To delete the directory data.
• To reset the telephone settings.
STEP 1: Display the Menu screen, and select Setting.
1
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
• Press 1 key.
[Setting]
1
User Setting
2
Download
Data Backup/Restore
3
↓
Note: For the firmware version earlier than 5.0.0.0,
Back is displayed instead of Menu.
4
STEP 3: Select Change Password.
Select an item by either of the following operations.
• Highlight an item by using
or OK soft key.
4
• Press key.
DT730/DT710
, and then press
Menu OK
, and then press
[User Setting]
1
2 Talk
3
4
Change Password
5
6
7
↓
STEP 4: The Change Password screen is displayed.
Enter the old password and then press
,
Set soft key.
[Change Password]
Old Pass
New Pass
Retry Pass
BK
Note: The initial password is "0000". When changing
the password for the first time, enter "0000" as
the old password.
STEP 5: Enter the new password and then press
or Set soft key.
,
72
Incoming Call
Display
Security
Peripherals
Usability
↓
Back OK
1
Set
Cancel OK
or