Multiline Appearance; To Hold A Call - NEC ITL-8LD-1 - DT730 - 8 Button DESI Less Display IP Phone User Manual

MULTILINE APPEARANCE

DT730/710 DT330/310
To Originate a Call
STEP 1: Press the MULTILINE APPEARANCE fea-
ture key.
STEP 2: Lift handset or press
Central Office access code (i.e.9 (US), 0
(Aust)).
STEP 3: Dial the desired number.
To Answer a Call
STEP 1: Press the MULTILINE APPEARANCE fea-
ture key (ringing and flashing LED alert user
to incoming call).
STEP 2: Lift handset or press
STEP 3: Speak with incoming party.
Speaker
key. Dial the
Speaker
key.

TO HOLD A CALL

STEP 1: Press
HOLD
HOLD
1:25 PM
MIC
Note: If held line appears on other DT Series stations,
the associated LED flashes red slowly.
To Retrieve
STEP 1: Lift handset or press
STEP 2: Press held line. Use handset to converse.
Note:
Any station with this line appearance can retrieve
the call.
If unanswered
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on
hold.
Note:
Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
108
DT730/710 DT330/310
key. Held line wink flashes.
Held Station Number
2001
MON 12 JUL 2010
>>>
Speaker
key.