User Control Menu - Sony LMD-2451TD Operating Instructions Manual

Recommended: Konica Minolta Color Analyzer CA-
210
COLOR TEMP/SPACE
C O L O R T E M P :
M A N U A L A D J U S T M E N T
A D J U S T G A I N :
A D J U S T B I A S :
C O P Y F R O M :
3 D O F F S E T :
3 D O F F S E T A D J . :
C O L O R S PA C E :
Submenu
COLOR TEMP
MANUAL
ADJUSTMENT
3D OFFSET
3D OFFSET ADJ.
COLOR SPACE
26
Adjustment Using the Menus
xxxxxx
xxx
xx
xx
x
Setting
Selects the color temperature from
among D65, D93 and USER
settings.
If you set the COLOR TEMP to
USER setting, the item displayed is
changed from black to white, which
means you can adjust the color
temperature.
The set values are memorized.
• ADJUST GAIN: Adjusts the
color balance (GAIN).
• ADJUST BIAS: Adjusts the
color balance (BIAS).
• COPY FROM: If you select D65
or D93, the white balance
data for the selected color
temperature will be copied
in the USER setting.
Selects the desired mode pertaining
to the 3D offset adjustment.
• AUTO: The setting value of 3D
offset adjustment is not
applied to 2D display mode.
The setting value of 3D
offset adjustment is applied
to 3D display mode.
• OFF: The setting value of 3D
offset adjustment is not
applied to either 2D or 3D
display mode.
• ON: The setting value of 3D
offset adjustment is applied
to both 2D and 3D display
modes.
Available when 3D is selected from
2D/3D SELECT. Defines white
balance for 3D viewing in order to
provide colors as accurate as those
when 3D glasses are not used.
You can select from among R
GAIN, G GAIN, B GAIN, R BIAS,
G BIAS and B BIAS.
Selects the color space from among
EBU, SMPTE-C, ITU-709 and
OFF. OFF sets the color space to
the original color reproduction of
the LCD panel.

USER CONTROL menu

The USER CONTROL menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in black.
For details of input signals and adjustable/setting items,
see page 13.
For the video input
USER CONTROL 1/3
AU T O C H R O M A / P H A S E
AU T O A D J VA L U E :
S TA R T :
USER CONTROL 2/3
S U B C O N T R O L
C O N T R A S T :
B R I G H T N E S S :
C H R O M A :
P H A S E :
A P E R T U R E :
B A C K L I G H T :
USER CONTROL 3/3
P I C T U R E C O N T R O L
A C C :
C T I :
V S H A R P N E S S :
I N P U T S E T T I N G
S H I F T H :
S H I F T V :
Submenu Setting
AUTO CHROMA/ Adjusts color intensity (CHROMA)
PHASE and tones (PHASE).
• AUTO ADJ VALUE: Selects
• START: The auto adjustment
xx
x
x
x
x
x
x
xx
x
x
xxx
xx
ON or OFF of the auto
adjustment. When you set
to OFF, this parameter is
reset to the factory setting.
When you set to ON, the
automatically adjusted value
is enabled.
starts when you display the
color bar signals (Full/
SMPTE/EIA) on the screen
and press the ENTER
button. After adjusting the
color intensity, press the
MENU button to clear the
adjustment screen. After the
adjustment is done correctly,
the AUTO ADJ VALUE is
automatically set to ON.