Changing How Pois Display On The Map - DeLorme Topo USA 8.0 User Manual

1. Click the Options button
OR
Click the arrow next to the Options toolbar button to open the menu. Then,
click Options to open the dialog box.
2. Click the Display tab.
3. Under Appearance, select the contour detail from the Contours drop-down
list.
• Normal Detail—Uses the default values for displaying contours and
labels.
• High Detail—Approximately doubles the default values for displaying
contours and labels.
• Low Detail—Approximately halves the default values for displaying
contours and labels.
4. Click OK to accept the change and exit the Options dialog box.
OR
Click Apply to accept the change and keep working in the Options dialog box.

Changing How POIs Display on the Map

You can change the data zoom level at which large POI symbols display on the map.
To Change the Data Zoom Level for Large POI Symbols
Use the following steps to change the data zoom level at which large POI symbols
are displayed on the map.
1. Click the Options button
OR
Click the arrow next to the Options toolbar button to open the menu. Then,
click Options to open the dialog box.
2. Click the Display tab.
3. Select the data zoom level from the Large Symbols At drop-down list.
4. Click OK to accept the change and exit the Options dialog box.
OR
Click Apply to accept the change and keep working in the Options dialog box.
Notes
• The appearance of a POI many change at different data zoom levels.
• The number of points of interest that displays is dependent on the basic map
features you selected on the Map Features tab in the Options dialog box. For
more information, see Displaying Basic Map Features.
Customizing the Map and Tab Display
on the toolbar.
on the toolbar.
41