Table of Contents
Advertisement
Exchanging Information with a Palm OS Device
Sending a Handheld Map
Palm OS
Use the Exchange Wizard to send maps you cut using the Handheld Export tab to
your Palm® OS device. See Creating a Map Package to Send to a DeLorme
Earthmate or PDA for more information.
Note You must have Street Atlas USA® Handheld installed to view exported maps
on a PDA.
To Send a Handheld Map
Use the following steps to send a handheld map to a Palm OS device.
1. Click the Exchange button
Handheld Export tab to open the Exchange dialog box.
2. Click Use Other Device to open the Exchange Wizard.
3. Under Select Device, select Palm OS.
4. Select Send to Device.
5. Select Handheld Map from the Object Type drop-down list.
6. Click Next.
7. Under Source, select the map you want to send to your handheld device
from the Handheld Map drop-down list.
The maps saved in the specified location display in the list. To view maps
saved in an alternate location, click the browse button and browse to the
location. Then, select the map from the Handheld Map drop-down list.
8. Select the user you want to send the map to from the User drop-down list.
9. Select the media destination from the Destination drop-down list.
10. Click Prepare for Sync.
11. Click OK to return to the Exchange Wizard.
12. Repeat the steps for each map you want to send.
13. Click Finish.
The exported map is available on your handheld device after your next
synchronization operation.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the GPS tab or the Handheld Export tab.
Sending Route Information
Palm OS
Use the Exchange Wizard to send route points or route directions to your Palm® OS
device.
To Send Route Points
Use the following steps to send route points to your Palm OS device.
on the toolbar OR click
Using Handheld Devices
on the
221
Advertisement
Table of Contents
