Table of Contents
Advertisement
3. Select Send to Device.
4. Select User Map Data - Waypoints from the Object Type drop-down list.
5. Click Next.
6. Select the waypoint file you want to send to your device from the Waypoint
File drop-down list.
7. Click Prepare for Sync.
8. Repeat the steps for every waypoint file you want to send to your device.
9. Click Finish.
The waypoints are available on your handheld device after your next
synchronization operation.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the GPS tab or the Handheld Export tab.
Receiving a GPS Log
Palm OS
Use the Exchange Wizard to receive GPS logs created on your Palm® OS device.
Once imported, you can use the file in your mapping program.
To Receive GPS Logs From Your Palm OS Device
Use the following steps to receive GPS logs from your Palm OS device.
1. Click the Exchange button
2. Click Use Other Device to open the Exchange Wizard.
3. Under Select Device, select Palm OS.
4. Select Receive from Device.
5. Select GPS Logs from the Object Type drop-down list.
6. Click Next.
7. Select the GPS log you want to receive from the GPS Log drop-down list.
8. Click Receive From Device.
9. Repeats the steps for each GPS log file you want to receive.
10. Click Finish.
Tip You can also open the Exchange dialog by clicking the Exchange button
on the GPS tab or the Handheld Export tab.
Receiving a Route
Palm OS
Use the Exchange Wizard to receive a route created on your Palm® OS device. Once
imported, you can use the file in your mapping program.
To Receive a Route From Your Palm OS Device
Use the following steps to receive a route from your Palm OS device.
1. Click the Exchange button
2. Click Use Other Device to open the Exchange Wizard.
on the toolbar.
on the toolbar.
Using Handheld Devices
223
Advertisement
Table of Contents
