Table of Contents
Advertisement
5. Click Import to display the Open Bitmap File dialog box. Browse to the
location of the bitmap and click Open.
The imported bitmap displays in the Symbol Editing Grid. See important
Notes below.
6. Use the tools in the Draw Tool Box and under Transparency and Anchor to
edit the symbol.
•
To undo the last action, click the Undo button
•
To repeat the last action, click the Redo button
Symbol.
7. To assign a symbol name to the current symbol, type a name or phrase in the
Symbol Name text box under Edit Symbol.
Note Once you assign a name to a symbol in a symbol set, each occurrence
of that symbol you place on the map retains the new symbol name in addition
to the default symbol name of "symbol."
8. Click OK when finished.
Notes
•
If you attempt to import a bitmap larger than 24 x 24 pixels into XSym, a
message box warns you the selected bitmap is larger than 24 x 24 pixels and
the image is reduced.
•
If the bitmap is less than 24 x 24 pixels, the remaining area is filled to the
edge of the Symbol Editing Grid with one of the symbol pixel colors.
•
As you create a symbol, an image preview displays to the upper-left of the
Symbol Editing Grid. You can make edits to the symbol in either the Image
Preview or the Symbol Editing Grid. Any edits done in one view are mirrored
in the other view.
Copying and Pasting
You can copy and paste portions of a symbol or whole symbols to create new
symbols or edit existing ones.
To Copy and Paste in XSym
Use the following steps to copy a symbol or portions of a symbol to edit an existing
symbol or to create a new symbol.
1. Click the Draw tab.
2. Click and hold the Symbol/MapNote/Text Label/Image tool
3. Under Symbols, select the symbol set that contains the symbol you want to
edit.
4. Click Edit.
The DeLorme XSym dialog box opens.
5. Under Symbols in Set, select a symbol from the symbol selection.
6. In the Draw Tool Box, click the Select tool.
7. Select the area of the symbol you want to copy or select the whole symbol,
and then click the Copy button
to view its hidden options. Select the Symbol tool
under Edit Symbol.
Using the Draw Tools
under Edit Symbol.
under Edit
.
145
Advertisement
Table of Contents
